Thursday, April 25, 2024
Home xin Can magpie steel wire winding packaging machine wind packaging iron wire, copper wire and spring steel wire?

Can magpie steel wire winding packaging machine wind packaging iron wire, copper wire and spring steel wire?

by admin
0 comment

I’ve seen a customer buy a steel wire winding packaging machine that seems to be magpie brand, which is the kind that replaces manual winding braid. I don’t know if it can wrap our iron wire and copper wire products. They are all wrapped with woven belts.

the winding packaging machine should do well in the following aspects during use:
1 When the j40-40 chain is tightened, the vibration of the chain can be eliminated by adding lubricating film between the internal and external mold frames, and the j40-40 chain can be tensioned. Other equipment, such as packer and vacuum packer, should also be maintained and lubricated regularly
2. When the rotary table slows down or slips, open the motor cover of the rotary table, loosen the four connecting bolts on the speed reduction mounting plate, and then evenly adjust the two tensioning bolts clockwise to achieve the required tensioning force, and tighten the four connecting bolts. The chain tension should be adjusted after the machine has been used for 10 ~ 15 days
3. The lifting, chassis and membrane frame drive are variable speed through the worm gear governor. In the process of use, please use it according to the following requirements:
1) the reducer with oil immersion lubrication is adopted. The oil immersion depth is the full tooth height of the worm if the worm is under or on the side of the worm gear; The above is 1 /3 of the outer diameter of the worm
2) synthetic worm oil 200# (kinematic viscosity 320 at 40oC) is recommended
3) if there is an oil mirror, it is 1 /2 of the oil mirror, and the center distance is a = 63mm. It is recommended to add 400ml
4) the oil needs to be replaced after about 10 days of operation, and then every 1 year
5) the ambient temperature should be – 40 – + 40oC. When it is lower than 0oC, the lubricating oil with low freezing point should be used
6) the gear reducer is lubricated with grease. There is no need to replace the grease during use, or replace it according to the actual situation
4. When placing the package of goods, it shall be handled and handled gently as far as possible, so as not to deform the chassis or shorten the service life of the parts
5. The goods shall not exceed the design packaging height, otherwise the packaging effect will be affected
6. The goods shall be placed within the range of the turntable. If the goods are too large, they shall be operated within 100mm or according to the actual space of the machine, otherwise the machine may be damaged
7. Close the electrical cabinet, clean and check the electrical parts and electrical connections regularly to ensure the normal use of the equipment
reference information:

You may also like

Leave a Comment

Soledad is the Best Newspaper and Magazine WordPress Theme with tons of options and demos ready to import. This theme is perfect for blogs and excellent for online stores, news, magazine or review sites.

Buy Soledad now!

Edtior's Picks

Latest Articles

u00a92022u00a0Soledad.u00a0All Right Reserved. Designed and Developed byu00a0Penci Design.